Внезапно отвалился диск, решил проверить, но не умею в логи смарта. Сколько ему еще осталось?
=== START OF INFORMATION SECTION === Model Family: Seagate Barracuda Green (AF) Device Model: ST2000DL003-9VT166 Serial Number: 5YD5XGNH LU WWN Device Id: 5 000c50 044179389 Firmware Version: CC32 User Capacity: 2 000 398 934 016 bytes [2,00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 5900 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Wed Apr 02 07:27:18 2014 SMART support is: Available — device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 623) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off supp ort. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 349) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x30b7) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 099 099 006 Pre-fail Always — 2569400 3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Always — 0 4 Start_Stop_Count 0x0032 098 098 020 Old_age Always — 2178 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always — 592 7 Seek_Error_Rate 0x000f 058 055 030 Pre-fail Always — 133167100063 9 Power_On_Hours 0x0032 089 089 000 Old_age Always — 10244 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always — 0 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always — 1574 183 Runtime_Bad_Block 0x0032 096 096 000 Old_age Always — 4 184 End-to-End_Error 0x0032 100 100 099 Old_age Always — 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always — 0 188 Command_Timeout 0x0032 100 099 000 Old_age Always — 1 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always — 0 190 Airflow_Temperature_Cel 0x0022 056 049 045 Old_age Always — 44 (Min/Max 40/44) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always — 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always — 154 193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always — 2379 194 Temperature_Celsius 0x0022 044 051 000 Old_age Always — 44 (0 20 0 0 0) 195 Hardware_ECC_Recovered 0x001a 023 006 000 Old_age Always — 2569400 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always — 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline — 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always — 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline — 116771570854119 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline — 3983272616 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline — 1097426226 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.