Почему не работает saned?
На сервере
Ubuntu 16.04
К серверу подключил сканер в usb порт. На сервере поставил apt-get install sane sane-utils
/etc/default/saned
# Defaults for the saned initscript, from sane-utils # Set to yes to start saned RUN=yes # Set to the user saned should run as RUN_AS_USER=saned
/etc/sane.d/saned.conf:
# saned.conf # Configuration for the saned daemon ## Daemon options # Port range for the data connection. Choose a range inside [1024 — 65535]. # Avoid specifying too large a range, for performance reasons. # # ONLY use this if your saned server is sitting behind a firewall. If your # firewall is a Linux machine, we strongly recommend using the # Netfilter nf_conntrack_sane connection tracking module instead. # # data_portrange = 10000 — 10100 ## Access list # A list of host names, IP addresses or IP subnets (CIDR notation) that # are permitted to use local SANE devices. IPv6 addresses must be enclosed # in brackets, and should always be specified in their compressed form. # # The hostname matching is not case-sensitive. 192.168.1.0/24 #scan-client.somedomain.firm #192.168.0.1 #192.168.0.1/29 #[2001:db8:185e::42:12] #[2001:db8:185e::42:12]/64 # NOTE: /etc/inetd.conf (or /etc/xinetd.conf) and # /etc/services must also be properly configured to start # the saned daemon as documented in saned(8), services(4) # and inetd.conf(4) (or xinetd.conf(5)).
Читать дальше
Ubuntu 16.04
К серверу подключил сканер в usb порт. На сервере поставил apt-get install sane sane-utils
/etc/default/saned
# Defaults for the saned initscript, from sane-utils # Set to yes to start saned RUN=yes # Set to the user saned should run as RUN_AS_USER=saned
/etc/sane.d/saned.conf:
# saned.conf # Configuration for the saned daemon ## Daemon options # Port range for the data connection. Choose a range inside [1024 — 65535]. # Avoid specifying too large a range, for performance reasons. # # ONLY use this if your saned server is sitting behind a firewall. If your # firewall is a Linux machine, we strongly recommend using the # Netfilter nf_conntrack_sane connection tracking module instead. # # data_portrange = 10000 — 10100 ## Access list # A list of host names, IP addresses or IP subnets (CIDR notation) that # are permitted to use local SANE devices. IPv6 addresses must be enclosed # in brackets, and should always be specified in their compressed form. # # The hostname matching is not case-sensitive. 192.168.1.0/24 #scan-client.somedomain.firm #192.168.0.1 #192.168.0.1/29 #[2001:db8:185e::42:12] #[2001:db8:185e::42:12]/64 # NOTE: /etc/inetd.conf (or /etc/xinetd.conf) and # /etc/services must also be properly configured to start # the saned daemon as documented in saned(8), services(4) # and inetd.conf(4) (or xinetd.conf(5)).